|
| |
| |
| |
| |
HYDROGEN GENERATOR FOR GAS CHROMATOGRAPHY |
|
|
|
|
|
|
| |
| |
| |
DISINTEGRATION TESTER FOR SUPPOSITORIES & PESSARIES |
|
|
|
| |
|
|
FEATURES :
 Complies to USP / BP / EP
Suitable for 4 liters and 12 liters test
Splash proof control panel with LCD
Programmable timer with alarm
On line calibration of temperature
Circulation pump
Illumination for better viewing of tablets
IQ / QQ documentation |
|
|
| |
| |
| |
DIGITAL ANTIBIOTIC ZONE READER |
|
|
|
|
|
| |
| |
| |
DISSOLUTION TESTER MODEL NO : DR - 6 |
|
|
|
| |
|
|
FEATURES:
Supports 6 / 8 / 14 Stations
Confirms to all current USP and EP specification
Short length shafts
Supports single step / Multi step dissolution
Safety features
Upto 9 programmable steps / sample intervals
Easy validation procedure
Parallel printer port (optional)
RS 232 Port for PC Interface
IQ / QQ documentation
|
|
|
| |
| |
| |
TABLET DISINTEGRATION TESTERS |
|
|
|
|
|
| |
| |
| |
TABLET INSPECTION MACHINE |
|
|
|
|
| |
|
|
| |
| |
| |
LACQUER POROSITY APPARATUS |
|
|
|
|
| |
|
|
This equipment is specially designed for testing of the porosity of lacquer or wax which is internally coated on tubes as per ISI std.
The coated tube is filled with test-solution containing copper sulphate and copper electrode is immersed in this solution. The tube itself makes contact with the cathode and fixed small D.C. potential is then applied between the sliding top copper whose flow is proportional to the areas of the surface not covered by internal coating. In addition visual indication is provided by deposition of copper if coating is not continuous.
The equipment is capable of giving reading direct on LED display.
The equipment provides the required information quickly and reliably and is particularly suitable for quality control application.
Assembled in a mild steel cabinet of size 27.5 cm x 22.5 cm x 17.5 cm. Finished in powder coated paint. The equipment is suitable for 230V AC 50 Hz. |
|
|
| |
| |
| |
TABLET HARDNESS TESTER STRONG COBB SHT-17 |
|
|
|
|
| |
Hardness tester {Strong Cobb) model SHT-17 is simple manually operated. Needs no electrical power. Pressure gauge will be supplied along with the calibration certificate. Easy operation and almost maintenance free.
Basically hand operated Hardness Tester model SHT - 17 works on Peneumatic Pressure developed by hand operated lever system. Indication of the measured value will be on pressure gauage dial ( 0-17 kg per sq.cm. ) with idle pointer.
In dial Guage there are two pointers :
a) Red Pointer
b) Air Pressure Pointer ( Black )
|
|
|
|
|
| |
|
| |
|
|
FEATURES:
Complies to USP and other pharmacopoeias
Compact, Simple & Easy to Operate
Cost Effective
Supports friability drum with single scoop (standard), friability drum with double scoop and abrasion drum
Auto discharge of tablets after friability test with single scoop friability drum
Dual mode of operation timer mode or revolution count mode
20X4 LC Display with backlit & 7 key operating panel allows alphanumeric entries to enter information about product (product name, number, batch number) & user (name of the user and comments)
Menu driven operation makes user friendly
Selectable types of operation with Friability test, Abrasion (Attrition) test with single or double drums
10º tilt facility
Easy to validate
Calculation of percentage weight loss and displays the results of selected test type
Power failure prompt to discard or continue the test
Parallel Printer Port for taking hard copy of the test report as per GMP |
|
|
| |
|
|
| |
| |
| |
DIGITAL MELTING POINT APPARATUS |
|
|
|
|
| |
|
|
FEATURES:
Easy to operate
Temperature range Ambient to 320°C
Suitable for transparent as well as colour samples
Micro controller based circuit ensure controll rate of heating
Buzzer for melting zone
The heating is at the rate of 3°C to get accurate reading
Starting & end melting point of 3 samples can be recorded
Special illumination & lens for viewing of melting point
Result are stored even after failure of electricity
Printer port for 80 col. Dot matrix & Deskjet printer
IQ / OQ Documentation
|
|
|
| |
|
|
| |
|
| |
|
|
FEATURES:
Compact, space saving and with advanced microprocessor design yet economical price.
Accurately measures the width, thickness, diameter and hardness of the tablet.
Analytical balance can be connected for measuring the weight the fifth parameter.
Menu driven operation together with pc compatible Keyboard and large 240X128 graphic LC Display makes operation simple.
Unit of Hardness in Newton (N), Kilopond (Kp), Strong Cobb (Sc) and User Defined (UD).
Precise positioning of sample accommodates any shape tablet up to 36mm Diameter (length).
Incorporated the CFR21 Part 11 feature of password protection (3 level ADMIN, SUPERVISOR and USER password).
50 different product recipes can be created stored and recalled.
Settable sample size up to100 Samples per test.
Simple & easy calibration and / or verification (Validation) with certified 10mm gauge block for distance parameter and 5Kg weight for hardness parameter.
RS232 interface for connecting with PC. Parallel Printer Interface.
Various reports can be generated.
Supports dot matrix / deskJet / laserJet.
IQ /OQ Documentation.
|
|
|
| |
| |
| |
DIGITAL HARDNESS TESTERS DHT-250 |
|
|
|
|
|
| |
| |
| |
TABLET HARDNESS TESTERS HT - 50P (PORTABLE) |
|
|
|
|
| |
|
|
FEATURES:
Compact, Simple & Easy to Operate.
Cost Effective.
Selectable Unit of measurement Kiloponds (Kp), Newtons (N), Pounds (lb or lbf) and Strong cobb (Sc).
Microprocessor based reading of measurement.
Easy to Calibrate.
|
|
|
| |
| |
| |
TABLET HARDNESS TESTERS DHT-150 |
|
|
|
|
|
| |
| |
| |
COMPUTER CONTROLLED POTENTIOMETER TITRATOR |
|
|
|
|
| |
| |
